PARTS LIST

VCR Pong
David B. Thomas
dt@dt.prohosting.com
http://dt.prohosting.com/pic/pong.html

Most parts are not critical.  Resistors are shown with precision
values on the schematic but the values are not critical.

C1-3	.1 uF
C4-5	22 pF (leave off when building in breadboard)
C6	10 uF
D1	1N914
Q1	2N4124, 2N2222, 2N3904 or equiv. NPN
R1-2	4.7K
R3	1.1K
R4	75 ohm
R5-6	10K linear taper pots (greater than 20K won't work)
U1	Microchip PIC16C711 controller
U2	LM340T5 or 7805 5 volt 3 terminal regulator
XT1	16 MHz crystal

I plan to get some PC boards made, but please don't wait for my order
to come in.  This game is perhaps even more fun on a breadboard.  It
is just so hard to believe that this teeny circuit is actually a
complete game of Pong!

The code is freely available for download.  If you prefer, I can mail
you a preprogrammed controller chip (you cover the cost of the chip
and postage).